This part code is for a replacement Fluorocarbon Rubber O-ring for the TS1254 pressure pot. The standard EPR O-ring supplied with the TS1254 pressure pot is silicone and is intended for applications with lubricants, conductive and non-conductive adhesives and various other compounds not listed below. This enhanced O-ring may be cleaned with Toluene and/or Isopropyl Alcohol. Pricing is for a pack of 3 O-rings. 

​Manufacturers Part Code: 1254-VITON
​Manufacturer: Techcon Systems
​Origin: USA
​Pack Size: 3 Pieces
​Size: M6 x 0.114 Inch ID
​Details: Industrial Grade Safe
Commodity Code: 40169300

WARNING: Do not soak O-ring in Toluene, MEK and Acetone. Read material safety data sheet for any solvent prior to use.

Spare O-ring. This kit is made from Fluorocarbon Rubber and is intended for applications using fluids containing Solvents, UV adhesives, Cyanoacrylates (CAs), Methacrylates, and/or Acrylic Acids. If used, this O-ring may be cleaned as necessary with Isopropyl Alcohol, Acetone and MEK.

Please note: Occasionally Silicone O-ring will swell or degrade when in contact with some UV adhesives, Cyanoacrylates (CAs), Methacrylates and/or Acrylic Acids. This might be due to other components in the fluid product. In these cases we recommend switching to this Fluorocarbon Rubber O-ring which will then perform better with this type of fluid. The O-ring is easy to replace, fitted in the slot within the tank lid.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.