T570H-C Fume Filtration System

T570H-C Fume Filtration System
Product Code: T570H-C

Filter unit for aerosol adhesives, lacquers, solvents, paints, solders.

Contain and filter for a cleaner, healthier working environment within dental labs, electronic design and rework, pharmaceutical labs, education and more.

For use in numerous situations where external venting is impractical but where contaminant capture and filtration is necessary

Applications include the filtration of fume, vapour and particulates emanating from monomers, adhesives, hazardous powders/particulates, conformal coatings, resins, sealants, solders, light grinding particles and dusts, organic solvents etc.


Part ID: T570H-C

Fan Motor Spec: 230V 50Hz 105W
Air Volume at Free Air: 202 m3/hr
Air Velocity at Filter Face: 0.50 m/sec
Air Velocity at Hood Face: 0.32 m/sec
Noise Level: 58 dB (A)
Weight: 13 kg
Lead Time: 3-4 days


Fan/filter casing (steel construction finished in dove grey) - clear PETG plastic fume hood - pre filter - carbon or HEPA filter - radial blower, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filters - carry handle.
*110V 60Hz version available if required.


All WS filtration systems and extraction systems carry a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. These units can be used in two positions.

The T570 Hood has a hinged lid to assist, for example, in positioning weigh scales and the like within the hood. The weighing and handling of potentially harmful powders/particulates, applying adhesives, cleaning solvents, soldering and using small grinding tools etc is carried out within the hood and cleaned air is vented to the right rear of the cabinet.


Comprises of a pre-filter to 15-20 microns followed by a 3.5 kg high grade bonded carbon filter for hydrocarbon (organic solvent, gas) adsorption (T570H-C). Or alternatively a pre-filter to 15-20 microns with a HEPA mini pleat for fine particulate removal to 0.3 micron (T570H-H).

The process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced.

This unit is designed for immediate operator protection from concentrations of airborne contaminants whereby all gases, fumes, vapours and particulates within the hood enclosure are filtered and cleaned air is exhausted to the right rear of the cabinet. It is not recommended for continual usage, i.e. production applications, particularly in confined and/or badly ventilated areas.

See larger TechFlo filtration/extraction cabinets for higher specification requirements. Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH).

Price: £955.00   Exc VAT
  • Product Brand:WS
  • MPN: T570H-C
Write a Review

Write an online review and share your thoughts with other shoppers!

Be the first to review this product