The TS255 system will dispense thin, watery liquids and solvents as well as Cyanoacrylate adhesives. All are applied quickly, accurately to reduce waste, mess and hand fatigue.
This is a system available with 0-15 psi adjustable air regulator for most fluids and pastes or use the 0-100 psi version for gels and pastes. You hold the syringe like a pen, adjust the air pressure to suit the liquid being dispensed then press the foot pedal to apply. When the pedal is released, the deposit instantly stops without drips or oozing. It is safe and simple to use and reduces time spent manually applying liquids. The dispenser is supplied with a user guide.
An adjustable vacuum provides suck-back to the tip to prevent watery liquids from dripping. We recommend the use of an inline filter on the air adapter to the syringe when dispensing low viscosity fluids. The LCD display shows the timer which can be adjusted from 0.02 to 60 seconds for repeat deposits, down to micro-dots. A shot counter shows the number of deposits made during a shift.
This compact dispenser sits on the bench and requires an air input from any compressor or factory mains supply. It comes with airline hose and fittings kit to make connection easy. It will work with any power supply and is supplied with plugs for use in most countries. Includes a syringe stand, syringe and piston kit and needle tip kit selection. Ready to use out of the box.
Timer: 0.02 to 60 seconds
Output Pressure: Up to 15 psi (or 0-15 psi)
Input Pressure: 70-100 psi
Size: 152 x 165 x 178mm
Weight: 1.2kg (2.6lb)
Input Voltage: 100-240 V AC
Warranty: 1 Year
Cycle Rate: Up to 600 cycles/minute
Timing Tolerances: +/- 0.001%
Meets or Exceeds: CE, TUV-GS, NRTL
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.