The MFR-1100 Single Output Series is a highly versatile unit that is available with either a soldering/blade tips, soldering/rework cartridges or tweezer hand-piece. The MFR-1120 includes a solder/blade tip hand-piece (MFR-H2-ST2) and a workstand. See below for the list of tips available for the MFR-1120. Other accessories are also available.

Features and Benefits:
SmartHeat Technology includes a microprocessor controlled heating system that operates at lower temperatures and eliminates calibration time.

MFR-1100 units are designed for use with 5 different hand-pieces, including a desoldering option.
Each hand-piece has a large variety of cartridges and Tips for maximum flexibility
Ergonomic hand-piece helps ensure operator safety and comfort
Small bench top footprint
Can be combined with the MFR-2200 Dual Output Series for additional application options.

Product Comprises of:
MFR-PS1100:    MFR Single Output Power Supply
MFR-H2-ST2:    Tip Soldering Hand-piece for the MFR Series
WS1:        Soldering Workstand, Compatible with MFR-H2-ST2 Hand-piece
NOTE:         Tips/Cartridges sold separately.

Tips / Cartridges Series compatible with this system:
SxV Soldering Tips
CxV Blade Tips

Technical Specification
Power Supply:
Ambient Operating Temperature:    10 - 40°C (50°F - 104°F)
Maximum Enclosure Temperature:    55°C (131°F)
Input Line Voltage:        100 - 240 VAC
Input Line Frequency:        50/60 Hz grounded circuit
Power Consumption:        65 Watts maximum
Output Power:            60 Watts maximum
Output Frequency:        450 KHz
Power Cord:            (3-wire) 183 cm 18/3 SJT
Dimensions (approx.) W x D x H:    90mm (3.5”) x 200mm (8”) x 152.5mm (6”)
Weight:                2.3kg (5.05 lbs)
Surface Resistivity:        105-109 Ohms
Certification / Marking:    cTUVus, CE
Hand-piece Cable Length:    L=122cm (48"), burn resistant, ESD safe
Handle and Workstand:

Tip-to-Ground Potential:    < 2 mV RMS
Tip-to-Ground Resistance:    < 2 ohms
Idle Temperature Repeatability:    +/- 1.1°C (2°F) in still air
Handle Cord Assembly Length:    122cm - burn proof, ESD safe
Connector:            8-pin circular DIN
Workstand W x D x H:        100mm x 200mm x 100mm (4" x 8" x 4")
Workstand Weight:        0.69 kg (1.51 lbs)

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all types of assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicone's, gels, resins and epoxies.