Categories
Filtration Systems
Filtration systems recirculate cleaned air safely back into the workplace environment. They do not require the fumes to be ducted out of a vent or open window. They use a main filter and a series of other filters to remove adhesive or solder fumes and particles and expel safe air. Ideal for use with adhesives, solvents, aerosols and other fluids.
Extraction Systems
Extraction systems draw fumes from the working environment in flexible ducting hose to an outside window or vent. They use a powerful extractor fan and main filter with other filters to remove adhesive or solder fumes & particles safely out of the building. Ideal for use with adhesives, solvents, aerosols and other fluids. Recommended for high fume levels.

Fume Extraction

For removing fumes in production assembly and rework operations, from hand soldering to using solder pots, adhesives, chemicals and sealants.  Airborne particulates generated can be a serious health hazard and extraction systems will eliminate this problem. Most solder products contain fluxes either rosin or synthetic that, when heated, will give off harmful fumes and gases.

Fume extraction and filtration systems for a safe working environment when handling adhesives, glues, aerosols, soldering systems and solvents. Removal and reduction of fumes, vapours, mists, particles and dust to the Control of Hazardous to Health (COSHH) regulations 2002 and 2004.

Filtration systems recirculate filtered air safely back into the workplace. Extraction systems exhaust filtered air via a flexi-duct to the atmosphere and typically outside of the room or building.