Air powered twin cartridge gun to accept industry standard 200/ 400/ 600ml cartridges.
Air powered twin cartridge gun 200ml. For 10:1 ratio cartridges only. Actuator Ø 70mm.
Air powered twin cartridge gun 200ml. For 1:1/ 2:1 ratio cartridges only. Actuator Ø 70mm.
Air powered twin cartridge gun 200ml. For 4:1 ratio cartridges only. Actuator Ø 70mm.
Air powered twin cartridge gun to accept industry standard 200ml dual cartridges only.
Air powered twin cartridge gun to accept industry standard 200ml/ 400ml cartridges.
Air powered twin cartridge gun 50ml. For 1:1/ 2:1/ 4:1/ 10:1 cartridges. With regulator knob.
A dispensing system for solder pastes, conductive adhesives, epoxy resins, pre-mixed & frozen.
Epoxy & Resin Dispensing Systems
Two-component epoxy dispensing systems
Our precision dispensing systems handle most adhesives, liquids, gels and pastes without mess, waste, error or hand fatigue. These products have been assembled ready to use for two-part epoxy resins, dual mix silicones, polyurethanes and doming resins. To blend resin & catalyst then dispense in controlled amounts. By hand and hands free.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
Many epoxies and other two-component adhesives are available in 50ml, 200ml, 400ml and 600ml dual cartridges with mix ratio's of 1:1, 2:1, 4: 1 and 10:1 by volume. We supply dispensing systems to use with these standard Sulzer and TAH cartridges with mixer nozzles.
For two-component materials supplied in Semkit or Techkit cartridges, we have a range of dispensing equipment to use with the 2.5oz, 6oz, 8oz, 10oz, 12oz and 20oz sizes.
Other systems for handling epoxies, silicones and resins include syringe barrel dispensers for long cure or single part materials and syringe guns. Further information on all products with advice and support is available at our knowledge base.