Categories
A System 50ml Dual Cartridges
The standard small cartridge with bayonet twist-on attachment of mix nozzle. Available in 50ml and 75ml sizes with 1:1, 2:1, 4:1 and 10:1 mix ratios. Pistons are vented to allow easy insertion and to eliminate air entrapment. Supplied in complete sets but choice of mix nozzles are ordered separately. These cartridges are for use with "MA", "MAQ" and "MAQ" mix nozzles where they twist-on.
B System 25ml & 50ml Dual Cartridges
Small cartridge with dual prong threaded cap attachment of mix nozzle. Available in 25ml, 50ml and 75ml sizes with 1:1, 2:1, 4:1 and 10:1 mix ratios. Pistons are vented to allow easy insertion and to eliminate air entrapment. Supplied in complete sets but choice of mix nozzles are ordered separately. Use with "MB", "MBX" and "MBQ" mix nozzles where the grey cap locks the nozzle on.
C System 200ml & 400ml Dual Cartridges
Dual cartridge with push-on bell mouth attachment of mix nozzle. In 200ml & 400ml sizes with 1:1, 2:1, 4:1 and 10:1 mix ratios. Pistons are vented to allow easy insertion and to eliminate air entrapment. Supplied in complete sets but choice of mix nozzles are ordered separately. Use with nozzles "MC" & "MCX" where bell mouth pushes over the end & a threaded nut secures.
F System 200ml & 400ml Dual Cartridges
Dual cartridge with dual prong hole attachment of mix nozzle. In 200ml & 400ml sizes with 1:1, 2:1, 4:1 and 10:1 mix ratios. Pistons are vented to allow easy insertion and to eliminate air entrapment. Supplied in complete sets but choice of mix nozzles are ordered separately. Use with nozzles "MFH", "MFX" & "MFQ" where cap pushes into 2 holes & a threaded nut secures.
K System 2.5ml, 3ml, 5ml, 10ml Dual Syringes
The K-System is a manual dual syringe in 2.5ml, 3ml, 5ml and 10ml sizes. Thanks to a range of mixing ratios, materials and colors, the K-System is suitable both for industry as well as DIY users. The ergonomically designed dispensing plunger enables even highly viscous adhesives to be applied. The plunger rod of the K-System may be used over and over again with the dual syringes.

Dual Cartridges


High density dual component dispense cartridges for two part adhesives, epoxies, silicones and other fluids. All sets are supplied with matching pistons and a tip cap ready for filling and dispensing. Use with our range of manual and pneumatic cartridges guns. Industrial grade and silicone free.  In 50ml, 200ml or 400ml sizes.

High density polypropylene cartridges for two component materials. Can be used with manual and pneumatic dispensing guns. Each set includes cartridges, pistons and tip cap seal. Supplied in packs ready for filling with most two part epoxies, silicone, compounds or other liquids.

Each 50ml set includes the cartridge body, 2 x pistons and a tip cap seal. Each 200ml and 400ml set includes the cartridge body, 2 x pistons, tip cap seal and threaded collar (to secure the static mixer nozzle).

Cartridges use standard static mixer nozzles. Cartridges are in mix ratio's 1:1, 2:1, 4:1 and 10:1. Products are industrial grade safe to 100 psi and are certified silicone free. Guns are available for all size cartridges either in manual of pneumatic.

 
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.