Products

Cartridge Mixers MC/ MCH Series 200ml/ 400ml C System

MC static mixers are used for dispensing adhesives from two-part 200 ml, 400 ml and 600 ml plastic cartridges . Available ratios are 1:1 and 2:1. These mixers are attached using a retaining nut. Static mixers are often referred to as nozzles. Mixers can be used with epoxy, polyurethane, silicone, and a variety of other adhesives and sealants. They have a clear body and white elements.

MCHX static mixers are used for dispensing adhesives from two-part 200 ml, 400 ml and 600 ml plastic cartridges . Available ratios are 4:1 and 10:1. These mixers are attached using a retaining nut. Static mixers are often referred to as nozzles. Mixers can be used with epoxy, polyurethane, silicone, and a variety of other adhesives and sealants. They have a clear body and orange elements.

Stepped outlet that can be cut back to increase orifice size or use with separate luer tip adapters. The bell-mouth is the material entry end of the nozzle and the part that fits over the machine exit manifold. Elements inside the body of the nozzle are manufactured from high grade polyacetal to withstand the pressures of metering and mixing machines; static mixer housings are polypro. Static-mixing nozzles have an inside-diameter size of bell-mouth: 0.625” (15.9mm).


Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.