The TS9150 is a cost-effective analogue dispenser. It’s light weight and compact size makes this the ideal bench top dispensing solution for all your gluing, solder paste application and most other materials viscous or not.
Typically used with adhesives thick and thin, RTVs, silicones, solder pastes, greases, threadlockers, anaerobics, primers, single epoxies, liquid fluxes, inks, paints, coatings, resins, sealants, PVA glue, etc.
Its simplified construction and operation makes it easy for even someone that has never used a dispenser before. The unit comes with two modes; manual/pre-set timer. Features vacuum suck-back to prevent drips of watery liquids.
Supplied complete with syringe barrel assortment, needle tip kit, adapter assembly hoses, foot switch, finger switch, power cord, instruction guide and manuals. CE certified and covered by a 2 year warranty.
This classic designed benchtop dispenser is simple to use and operate and we offer full technical support for setting up.Supplied with a power cord, foot pedal, finger switch, user guide, barrel adapter assembly with air hose, barrels, pistons and a selection of needle tips.
Dispensers require clean and dry compressed air from most small compressors, a mains factory air supply or nitrogen. We recommend the use of a 5 micron air filter on the supply air into the dispenser. This will reduce oil, moisture and particles from the air supply. These dispensers will handle many viscosity fluids from liquids to pastes.
Timer: 0.01 - 31 seconds or continuous mode
Output Pressure: 1-100 PSI
Input Pressure: 80-100 PSI
Size: 210 x 241 x 70 mm
Weight: 2.1 kg
Cylce Rate: Up to 600 cycles/ minute
Timer Repeatibility: ±0.1%
Input Voltage: 110/220V AC
Warranty: 2 Years