Bench top dispensing systems for the controlled application of watery liquids to thick pastes. Analog timer with adjustable air regulator and a vacuum suck back to prevent drips. Produce measured amounts or controlled beads of most liquids.
The ADL810 is a cost-effective analog timed fluid dispenser. It’s light weight and compact size makes this the ideal bench top dispensing solution for all your gluing, solder paste application and most other materials viscous or not.
Typically used with adhesives thick and thin, RTVs, silicones, solder pastes, greases, threadlockers, anaerobics, primers, single epoxies, liquid fluxes, inks, paints, coatings, resins, sealants, PVA glue, etc.
Its simplified construction and operation makes it easy for even someone that has never used a dispenser before. The unit comes with two modes; manual/pre-set timer. Features vacuum suck-back to prevent drips of watery liquids.
Supplied complete with syringe barrel assortment, needle tip kit, adapter assembly hoses, foot switch, power cord, instruction guide and manuals. CE approved and covered by a 1 year warranty.
This classic designed benchtop dispenser is simple to use and operate and we offer full technical support for setting up.
Dispensers require clean and dry compressed air from most small compressors, a mains factory air supply or nitrogen. We recommend the use of a 5 micron air filter on the supply air into the dispenser. This will reduce oil, moisture and particles from the air supply. These dispensers will handle many viscosity fluids from liquids to pastes. Select power option and barrel size.
Timer: 0.02 - 30 seconds
Output Pressure: Up to 100 psi
Input Pressure: 80-100 psi
Size: 195 x 216 x 60 mm
Weight: 2.5 kg
Input Voltage: 110 to 220 V AC
Warranty: 1 Year
Cycle Rate: Up to 600 cycles/minute
Timing Repeatability: ±0.1%
Meets or Exceeds: CE Certified
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.