Finger wand switch for peristaltic pump dispensers. 6ft. Long cable. Jack plug.
Finger wand nozzle for peristaltic pump dispensers. 1.7mm diameter outlet.
Finger wand nozzle for peristaltic pump dispensers. 2.1mm diameter outlet.
Finger wand nozzle for peristaltic pump dispensers. 2.6mm diameter outlet.
Finger wand nozzle for peristaltic pump dispensers. 3.5mm diameter outlet.
Finger wand switch for peristaltic pump dispensers. 5ft. Long cable. Jack plug.
End cap outlet fitting with tip for peristaltic pump dispenser finger switch wand
Air Free Dispensers
|
Our precision fluid dispensers offer higher levels of control than hand syringes, squeeze bottles, swabs and spatulas often found with manual assembly processes. Use this ar free system for low to medium viscosity liquids, adhesives, primers, activators and other fluids. Especially suitable for handling low viscosity Cyanoacrylate adhesives. Draws the liquid directly from the bottle. When finished, it reverses the pump to put the fluid back ! |
|
Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied by a turning rotor against a PTFE Teflon tube carrying the material. Usually these pumps are selected because the liquids might be hazardous or difficult to work with where it is preferable to limit any operator exposure. Another reason is that peristaltic pumps are completely air free.
The peristaltic pump is a type of positive displacement dispensing machine used for pumping a variety of materials. The fluid is contained within a flexible Teflon tube fitted inside a circular pump casing. The special rotor turns and compresses the flexible tube thus forcing the fluid to be pumped to move through the tube.
The digital timer allows you to dispense accurate and repeated amounts of fluid every time. The pumped fluid contacts only the inside surface of the tubing. There are no other valves, O-rings, seals or packing's to worry about in a peristaltic pump so it is zero maintenance.
No requirement for compressed air. Liquids are drawn direct from any bottles, cans, manufacturers bottles and along the supplied feed tubing without fatigue or error. By not using compressed air, moisture sensitive adhesives such as Cyanoacrylates will perform better and will not prematurely cure or frost in the bottles. This system is supplied with a full starter kit including PTFE tubing roll, needle tip kit selection box, user guide and product manuals. And we'll assist with full technical support to ensure a quick setup.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
