The ADL-200CAM hand held diaphragm valve provides precise and continuous micro shot applications for a number of fluids. This low cost hand held valve is excellent for most low to medium viscosity fluids. The gentle hand lever will open the diaphragm thus allowing fluids to flow accurately; when the lever is released the diaphragm will go back to the closed position and flow stops.
This manual valve doesn't require the use of a time/pressure dispenser. The control is by lever action alone. An adjustable screw changes the stroke for increased or decreased fluid flow.
Typical fluids dispensed with this valve include Cyanoacrylate adhesives, solvents, primers, activators, inks, paints, UV cureable adhesives and many others. Do not use this valve for two-part epoxies or thick pastes.
We supply the valve boxed with part TSD931-52, a fluid input fitting (which quick connects by luer lock twist-on/off attachment to the fluid line) as well as part TSD931-5, a luer lock tip adapter. When the tip is removed after use, a cap is provided (part 7015LLBPK) to seal off the end of the valve.
You can feed adhesive to this valve from any of our pressure pots. From the small 500 gram (0.5 litre) to the large 19 litre vessel. The valve remains closed until the lever is pressed so does not require a high pressure feed.
Part ID: ADL-200CAM
Size: 159mm L x 45mm Diameter
Weight: 156 g
Wetted Parts: Delrin, Teflon®
Viscosity Range: 1 - 5,000 CPS
Flow Rate: 1950ml/minute @ 50 psi
Max Fluid Pressure: 50 psi
Material Inlet: 1/8" (Part TSD931-52)
Material Outlet: 5/16-28" (Part TDS931-5)
Valve Mounting: n/a Colour: Black
Warranty: 1 Year
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.