AD930SG 30cc Manual Syringe Gun Dispenser

AD930SG 30cc Manual Syringe Gun Dispenser Applicator Adhesive Dispensing Techcon TS730SG
AD930SG 30cc Manual Syringe Gun Dispenser Applicator Adhesive Dispensing Techcon TS730SG AD930SG 30cc Manual Syringe Gun Dispenser Applicator Adhesive Dispensing Techcon TS730SG AD930SG 30cc Manual Syringe Gun Dispenser Applicator Adhesive Dispensing Techcon TS730SG AD930SG 30cc Manual Syringe Gun Dispenser Applicator Adhesive Dispensing Techcon TS730SG
Dispensing tips adhesive catalog luer lok
AD930SG 30cc Manual Syringe Gun Dispenser
Product Code: AD930SG

Manual 30cc syringe gun for hand application of pastes, gels and adhesives. Red Colour.
Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 30cc/ 30ml size syringe barrels. Ideal for low volume production, re-work or repair work.

Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8 Inch) once pressed to provide repeat deposits without drips or ooze.

Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment. Ideal for applying solder paste, solder flux, RTV, silicones, sealants, gels, greases, compounds, PVA glues and other liquids.

Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 30ml gun is also available conveniently supplied complete with our full component kit.

This product is shipped with the following:
5 x 30cc clear, black or amber syringe barrel (part code AD930-N, AD930-B or AD930-D)
5 x 30cc white wiper piston (part code AD930-WW)
1 x 30cc end cap (part code AD930-ECO)
1 x tip cap (part code AD900-ORTC)
2 x 14 gauge tapered tip (part code TTN14)
2 x 16 gauge tapered tip (part code TTN16)
2 x 18 gauge tapered tip (part code TTN18)
2 x 14 gauge general purpose tip 0.5" long (part code TE714050)
2 x 14 gauge general purpose tip 1.0" long (part code TE714100)

Order part code AD930SG-KIT if a full component kit is required.Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.  Data sheet here

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
Price: £23.12   Exc VAT
  • Product Brand:Adhesive Dispensing Ltd
  • MPN: AD930SGLead Time: Ships within 24 HoursSize: 30cc
Write a Review

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
 
  • Deposits of solder paste
  • Deposits of solder flux
  • Grease to lubricate bearings
  • PVA glue to small furniture joints
  • RTV to seal cases
  • Silicone deposits and beads
  • Gasket sealant and silicone repair
  • Shots of roach insecticides
  • General adhesive applications
Related Products