Products

AD900 Series Barrel Cap Seals

Premier AD900 series branded dispensing components are silicone and chloride free and designed to work with industry standard equipment. Dispensing components ensure accuracy, repeatability and productivity. Barrel sizes 3cc, 5cc, 10cc, 30cc and 55cc.

Syringe Barrels
Unique ultra-low draft construction of inner diameter yields high accuracy and stability. They are comprised of industry compliant silicone and chloride free, low friction polypropylene. Available in three different colours: Natural for most generic applications, amber provides protection of UV/visible light block (up to 520nm), but with the ability to see material inside the barrel; and black for total light block. Supplied in bulk packs and packs of 50.

Syringe Barrel Kits
For your convenience these syringe barrels and white standard wiper pistons are packaged together without pistons inserted. Kits with red flat walled pistons or black rubber pistons are also available. Supplied in bulk packs and packs of 50.

Air Powered Wiper Pistons
Spread the pressure evenly across, using a piston for consistent dispensing of even high viscosity material. Easy flow pistons (blue) require less pressure to dispense and prevent air from becoming entrapped during the dispense process. Tight fit wiper pistons (white) provide a complete seal for low viscosity fluid. Loose fit straight wall pistons (red) prevent stringing and bouncing when dispensing high viscosity material.  Rubber pistons (black) for dispensing high viscosity materials or braze pastes. Supplied in bulk packs and packs of 50. Made from polyethylene or neoprene (rubber version).

Snap-On End Cap Seals
Designed to seal large end of the syringe barrel to ensure no contaminants come in contact with material during storage and shipment. Optional colours of orange or blue. Made from Polyethylene. Supplied in bulk packs and packs of 50.

Luer Lock Tip Caps
Designed to seal the syringe barrel tip during storage and shipment. Fits all syringe barrel sizes. Supplied in bulk packs and packs of 50. Made from polypropylene. Available colours of orange, black, white, clear and blue.

Tri-Seal Stand up Tip Caps
Designed for easy attachment with large flat diameter at the base to allow for the syringe barrel to stand upright on the work bench. Supplied in bulk packs and packs of 50. Made from Polypropylene. Available colours of orange, black, white, green and blue.

Receiver Adapter Head Assemblies
Adapter head assemblies are the connecting link between time/pressure dispensers and syringe barrel assemblies. These one-piece precision moulded assemblies provide a safe leak free connection for high or low pressure dispensing. Available with 3 or 6 ft. (0.9 - 1.8 meters) of flexible polyurethane air tubing. Consists of the adapter head with EPR O-ring, tubing, safety clamp and male quick connector. Supplied individually. 4mm or 6mm OD tube options.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.