A200H Fume Filtration System

A200H Fume Filtration System
Product Code: A200H

Size: 670 W x 525 H x 450mm D Air Volume at Free Air: 325 m3/hr Air Velocity at Filter Face: 0.50 m/sec Air Velocity at Hood Face: 0.25 m/sec Noise Level: 59 dB (A)

Re-circulatory A2 size filter unit for aerosol adhesives, lacquers, solvents, paints, solders, particles and dust. Filtration of particles down to 5 micron. Carbon fibre filter assists in the reduction of solvent odours. Easy to use system. Includes fan with particle and carbon filters. The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.


Part ID: A200H

Fan Motor Spec: 230V 50Hz 105W
Air Volume at Free Air: 325 m3/hr
Air Velocity at Filter Face: 0.50 m/sec
Air Velocity at Hood Face: 0.25 m/sec
Noise Level: 59 dB (A)
Weight: 20 kg
Lead Time: Around 2-3 Weeks

Steel construction finished in dove grey – fan/filter unit mounted onto hood enclosure - particulate filter – carbon impregnated fibre filter – axial fan(s), external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filters. *110V 60Hz version available if required.

All filtration systems and extraction systems carry warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. These units can be used in two positions.

For artwork applications, standard A2 drawing boards can be placed within the hood enclosure. The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding etc.

The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.

The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced.

These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants. They are not recommended for continual usage, i.e. production applications, particularly in confined and/or badly ventilated areas. (See extraction cabinets A300S-D, A200H-D & A100H-D for complete vapour extraction or TechFlo range for higher specification filtration).

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH).

Price: £844.00   Exc VAT
  • Product Brand:ADL
  • MPN: A200HLead Time: Usually Ships 2-3 WeeksWarranty: 2 Years
Write a Review

Write an online review and share your thoughts with other shoppers!

Be the first to review this product