Categories
700 Series Syringe Barrels
The 700 series are premium quality air-powered dispensing barrels for use with pneumatic dispensers or manual syringe guns. They are available in sizes 3cc, 5cc, 10cc, 30cc or 55cc and in colours natural clear, amber tint or opaque black. Luer lock secure tip attachment. Silicone-free products and industrial grade safe to 100 psi air pressure.
700 Series Air Powered Pistons
Pistons wipe the inside of the barrel to ensure fluids and pastes are dispensed with air-entrapment and excessive waste. Use white PE pistons for general purpose, red flat wall pistons for very thick, stringy materials, blue easy-flow pistons for enhanced performance, rubber pistons for grease and water based glues or manual application.
700 Series Barrels and piston kits
The 700 series are premium quality air-powered dispensing barrels for use with pneumatic dispensers or manual syringe guns. They are available in sizes 3cc, 5cc, 10cc, 30cc or 55cc and in colours natural clear, amber tint or opaque black. Luer lock secure tip attachment. Buy barrels and pistons as a kit that includes both packed in the same box.
700 Series Syringe Barrel Caps
End caps provide an air-tight, leak free seal at the top end of the barrel. Snap-on quick attachment and easy to remove. In sizes 3cc, 5cc, 10cc and 30cc/55cc. Tip caps available in 2 styles - traditional type for use on luer lock and luer slip syringe barrels. Available in orange, white, black and clear. Round stand up syle in orange, black and clear for use with luer lock barrels.
700 Series Air Adapter Assemblies
The air connecting line between the dispenser and syringe barrel. Includes the moulded adapter head with rubber O-ring, fliexible airline hose in 3ft or 6ft length and quick connect attachment. Available in sizes 3cc, 5cc, 10cc or 30cc/55cc. With either 6mm diameter air hose or smaller bore 4mm diameter. ASafe for use to 100 psi air pressure. All adapters ship direct from stock.
Adapter Assembly O-Rings
Rubber O-rings seal the top of the adapter assembly head to prevent air leaks when under pressure. Adapter assembly O-rings can come into contact with adhesives or fluids inside the syringe barrels. EPR rubber is the standard type and suitable for use with all fluids. Use Viton O-rings for solvent based liquids. All adapters ship direct from stock.

700 Series Components

Industrial grade syringe dispensing barrels are manufactured to the very highest possible quality delivering exceptional performance and consistency. From moulding to packaging, barrels are guaranteed to be free of silicone contaminants and imperfections. Our full range of pneumatic dispensers and syringe guns are shipped with 700 series barrels and pistons. Safe, strong and cost effective, these products are premium grade. Ship direct from stock.


Syringe barrels are no- draft walls with consistent internal diameters that fit perfectly with pistons to guarantee consistent and highly accurate fluid dispensing. The 700 Series Premier dispensing syringe barrels are silicone and chloride- free and designed to work with industry standard dispensers, guns or manual plungers.

Pistons wipe the syringe insides as liquid is dispensed by a close tolerance fit. This eliminates air entrapment and fluid shear. Plastic pistons are available in 3 styles to suit different liquid types. New manual rubber pistons for hand assembly.

Barrel adapters are one-piece precision moulded for a safe and secure attachment. These connect the barrels to any air-powered dispenser.

New Manual hand operated rubber pistons and plastic plunger rods are available for use with 700 series premium barrels allowing the series to be used with air-powered dispensers, Syringe Gun applicators as well as a manual hand assembly.