Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 55cc/ 55ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 55ml gun is also available conveniently supplied complete with our full component kit.
Part Code: AD755MSG
Materials: Polypropylene/ Reinforced Nylon
Capacity: 55cc or 55ml
Length: 195mm (including rod)
Height: 125mm
Weight: 110 grams (without barrel)
Colour: Grey Handle/ Black Trigger/ plunger
Warranty: 1 Year
Commodity Code: 90289090
Brand: Adhesive Dispensing Ltd
This product is shipped with the following:
1 x 55cc barrel (Choose clear, black or amber - AD955-N, AD955-B or AD955-D)
1 x 55cc white wiper piston (part code AD930-WW)
1 x 55cc red end cap (part code AD930-ECO)
1 x Orange tip cap (part code AD900-ORTC)
1 x 14 gauge tapered tip olive (part code AD14TTN)
1 x 16 gauge tapered tip grey (part code AD16TTN)
1 x 18 gauge tapered tip green (part code AD18TTN)
Order part code AD755MSG-KIT if a full component kit is required. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids .
Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
Deposits of solder paste
Deposits of solder flux
Grease to lubricate bearings
PVA glue to small furniture joints
RTV to seal cases
Silicone deposits and beads
Gasket sealant and silicone repair
Shots of roach insecticides
General adhesive application
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
