AD2001 rigid is a two component room temperature curing, black coloured, odourless, thixatropic polyurethane adhesive mainly orientated to auto body shop and makes possible fast and easy repairs on most plastic parts. These include bumpers, lights, front grills, indicators, side protection in fact any rigid plastic part.

Suitable substrates are all thermosetting plastics and most thermoplastic such as ABS, PC, PPO, PP, EPDM & SAN. It has good adhesion to many different materials such as wood, concrete, ceramics and glass. So it has many applications beyond auto body repair. Supplied with 3 MA6.3-21L static mixer nozzles.

PRODUCT BENEFITS:
-  Fast hardening time
- Excellent grinding properties
- High strength
- Easy to apply
- Over pain table
- No marking through
- Suitable for many different materials

AREA OF APPLICATION:
AD2001 is used to repair plastic parts like bumpers, lights, front grills, blinkers, side protection, etc. whenever rigid parts are damaged. Suitable substrates are: all thermosetting plastics and most of all thermoplastic such as ABS, PC, PA, PPO, PP, PP+EPDM, SAN.

AD2001 also has very good adhesion on many different material as metal, wood, concrete, ceramics and glass.

PRODUCT APPLICATION:
AD2001 is available in two-component cartridges either 50 ml or 178 ml. Blending should be made through static mixer composed by a minimum of 16 elements.

TYPICAL REACTION PROPERTIES
10 gr of product at 20 °C

Property Value
Open time 1 minute
Bonding time 5 minute
Fully cured time 240 minute
Temperature of exothermic reaction 80 °C

PRODUCT STORAGE:
AD2001 has a shelf life of 12 months from the initial production as long as it is stored in a cool and dry place, between +10° C and 25 °C. Expiry date is indicated on the label.

The cartridges have to be kept in a sealed plastic bag and protected from light and heating sources inside the original packaging. Once opened, the cartridges will last until the expiry date (as long as the above conditions are met).

NOTE: The information, and, in particular, the recommendations relating to the application and end-use of our products, are given in good faith based on Adhesive Dispensing Ltd's current knowledge and experience of the products when properly stored, handled and applied under normal conditions.

We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user’s responsibility to determine suitability for the user’s purpose of any production method mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof.

Adhesive Dispensing Ltd specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of our products. Adhesive Dispensing Ltd specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits.

Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.