Our Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 30cc/ 30ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringeguns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment. Ideal for dots or beads of solder paste, solder flux, RTV, silicones, sealants, gels, grease, PVA glue and compounds. Each Syringe Gun kit includes the 30ml manual hand gun, (20) 30ml dispensing reservoir with 30ml pistons, (20) storage end caps, (20) tip caps, (50) assorted dispensing tips.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure.
- Includes full component kit
- Easy hand lever leverage
- Controlled deposit or bead
- Lightweight robust construction
- Quick syringe attachment
- Low cost dispensing solution
The guns are robust and handle most liquids and pastes dispensed from them. However, it is important to press the small release button at the top of the gun before pulling the rod back when changing syringe barrels. O-rings can become worn or covered in glue so they are available to order from stock. The gun is supplied with 1 spare o-ring in the pack. For future replacement, select the 30cc size in EPR or Viton. Please contact us if replacement rods are required.
Guns with kits come with the following: -
20 x 30cc clear luer lock syringe barrels (Part No. 7300LL1NPK)
20 x 30cc white wiper pistons (Part No. 7300009WPK)
20 x 30cc barrel end cap seals (Part No. 730000CRPK)
20 x barrel tip cap seals black (Part No. 7015LLBPK)
5 x smooth flow tapered tip 14 gauge olive (Part No. TTN14)
5 x smooth flow tapered tip 16 gauge grey (Part No. TTN16)
5 x smooth flow tapered tip 18 gauge green (Part No. TTN18)
5 x smooth flow tapered tip 20 gauge pink (Part No. TTN20)
5 x smooth flow tapered tip 22 gauge blue (Part No. TTN22)
5 x precision 1/2" tip 14 gauge olive (Part No. SE414050PK)
5 x precision 1/2" tip 15 gauge amber (Part No. SE415050PK)
5 x precision 1/2" tip 18 gauge green (Part No. SE418050PK)
5 x precision 1/2" tip 20 gauge pink (Part No. SE420050PK)
5 x precision 1/2" tip 21 gauge purple (Part No. SE421050PK)
Air-Powered Dispensers * Industrial Dispensing Components * Precision Dispense Valve Systems * Bench Robots * Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles