Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 30cc/ 30ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze. Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure.
Materials: Polypro/ Nylon
Capacity: 30cc or 30ml
Length: 250mm (including rod)
Weight: 110 grams (without barrel)
Warranty: 1 Year
This product is shipped with the following:
1 x 30cc barrel (Choice of clear, black or amber - part AD930-N, AD930-B or AD930-D).
1 x 30cc white wiper piston (part code 730009WPK)
1 x 30cc red end cap (part code 73000CRPK)
1 x orange tip cap (part code 7015LLPK)
1 x 14 gauge tapered tip olive (part code TTN14)
1 x 16 gauge tapered tip grey (part code TTN16)
1 x 18 gauge tapered tip green (part code TTN18)
Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids .
Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
Deposits of solder paste
Deposits of solder flux
Grease to lubricate bearings
PVA glue to small furniture joints
RTV to seal cases
Silicone deposits and beads
Gasket sealant and silicone repair
Shots of roach insecticides
General adhesive application
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.