1201-1215 Manual Valve Dispensing System for CA

1201-1215 Pinch Valve Dispensing System for CA Adhesive Dispensing Ltd
Dispensing tips adhesive catalog luer lok

Technical Support
1201-1215 Manual Valve Dispensing System for CA
Product Code: 1201-1215-1

Manual non-timed dispensing system with 500gram pressure pot. Select from 1-4 users.

Cyanoacrylate adhesive dispenser designed to accept a 500 gram bottle (1 lb) of instant adhesive. There is no pouring needed (ie: you drop your bottle of glue right into the dip-tube tank). Very little clean up is involved with this system and you do not smell the strong fumes of the glue as this is a contained system.

Options for a single user, two users, three users and four users. Select number of users. This will be a single pressure pot which will feed to each operator via a liquid manifold. The valve is designed to dispense thin and medium cyanoacrylates with controlled deposits of glue, with no dripping. The system has two ways to control the deposit: - needle tip size and tank pressure. The pressure on the tank can be adjusted and there is a 0-30 psi regulator gauge.

Buying a CA adhesive in a 500g sized bottle can be cost effective. Applying adhesives by hand can be slow and often too much is applied to each part which can create mess, waste and possible damage to products. Or too little adhesive can be applied which creates a weak bond and product failure. With this system, the adhesive bottle is placed directly inside the compact tank unit and fed under very low air pressure down flexible feed tubing to the and held pinch tube valve.

For CA's, dispensing tips supplied are Teflon lined to prevent rapid clogging of the adhesive. Using Teflon tips allows the operator to dispense without it blocking too quickly in between breaks or them having to replace tips too often.

This dispensing system will ship with a starter stock of Teflon tips, tip caps and fluid lines. The only requirement for this system is a compressed air supply of 30-60 psi. We recommend that the air supply is filtered against moisture. We supply low cost 5-micron filters (part TSD800-6).

Part ID: 1201-1215
Tank Unit: Up to 500g size
Time Range: n/a - manual control
Cycle Rate: n/a - manual control
Minimum Shot Size: n/a - manual control
Viscosity Range: 1-5,000 CPS
Warranty: 1 Year
Commodity Code: 90289090


Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

Price: £815.00   Exc VAT
  • Product Brand:Adhesive Dispensing Ltd
  • MPN: 1201-1215-1Lead Time: Ships 24 Hours - Stock ItemWarranty: 1 Year
Write a Review

Write an online review and share your thoughts with other shoppers!

Be the first to review this product

Related Products