Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 10cc/ 10ml size syringe barrels. Ideal for remote dispensing, low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment. Ideal for applying solder paste, solder flux, RTV, silicones, sealants, gels, greases, compounds, PVA glues and many other liquids.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 10ml gun is conveniently supplied complete with our full component kit. Choose kit with either standard clear barrels, black barrels (for UV light sensitive adhesives) or amber tinted (for UV sensitive adhesives).
This 10cc gun is shipped with the following:
30 x 10cc luer lock syringe barrels (Clear. 7100LL1NPK, Black. 7100LL1BPK or Amber. 7100LL1DPK)
30 x 10cc white opaque wiper pistons (Part No. 7100009WPK)
30 x 10cc barrel end cap seals (Part No. 710000CRPK)
30 x barrel tip cap seals black (Part No. 7015LLBPK)
5 x smooth flow tapered tip 14 gauge olive (Part No. TTN14)
5 x smooth flow tapered tip 16 gauge grey (Part No. TTN16)
5 x smooth flow tapered tip 18 gauge green (Part No. TTN18)
5 x smooth flow tapered tip 20 gauge pink (Part No. TTN20)
5 x smooth flow tapered tip 22 gauge blue (Part No. TTN22)
5 x precision 1/2" tip 14 gauge olive (Part No. TE714050PK)
5 x precision 1/2" tip 15 gauge amber (Part No. TE715050PK)
5 x precision 1/2" tip 18 gauge green (Part No. TE718050PK)
5 x precision 1/2" tip 20 gauge pink (Part No. TE720050PK)
5 x precision 1/2" tip 21 gauge purple (Part No. TE721050PK)
Gun not recommended for use with Cyanoacrylate adhesives, rapid cure two-component epoxies or very aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
