|
TS250 Digital Fluid
Dispenser |
 |
Bench top digital timed fluid dispenser with
adjustable 0-100 psi air regulator for dispensing low, medium and high viscosity
fluids accurately and consistently. Repeat dots or controlled beads
using foot switch or optional finger switch. A compact yet versatile
syringe dispenser or use with dispensing valve.
Read more... |
|
|
TS350 Advanced Fluid
Dispenser and Controller |
 |
Advanced bench
top digital timed fluid dispenser with 0-100 psi adjustable air regulator for
dispensing low, medium and high viscosity fluids accurately and
consistently. Rapid timer with memory
storage and teach modes. Can be linked to a PLC for remote activation. A
sophisticated
syringe dispenser or use with dispensing valve.
Read more... |
|
|
LDS9000 Air Free Dispensing
System |
 |
Air free linear drive syringe barrel dispensing
system. Unlike pneumatic machines, this intelligent dispensing
system knows the syringe size, volume and the dispense rate. The
highest level of process control and ideal for liquids with changing
viscosities. Use this system for guaranteed repeat deposits of
adhesives.
Read more... |
|
|
Benchtop Robots |
 |
Bench robots for use with all viscosity materials
including silicones, sealants and RTV's. Simple teach programming for
making exact dots, beads, arcs and circles. Rapid index speeds for low
cost automation. Robots include dispense head and a range of syringe
barrels. Silicones and sealants can also be
applied with the dispensing valve.
Read more... |
|
|
TS5622VU Vertical Valve
UHMW |
 |
Diaphragm valve where adhesive or
liquid is fed under pressure to the fluid housing, the
diaphragm opens to allow flow to the tip from the bottom. Adjustable
stroke control for fine tuning. UHMW head and diaphragm. Make rapid dots
or controlled beads. Use with TS250, TS350 or TS500R controllers and
either a pressure pot or cartridge retainer.
Read more... |
|
|
TS5623HU Hand Lever
Diaphragm Valves |
 |
Manual handheld diaphragm valve for making non timed
deposits and beads. Press hand lever to operate. Adjustable stroke
control for fine tuning. UHMW head and diaphragm. For cyanoacrylates,
primers, solvents, inks, oils, anaerobics. Comes with airline hose and
fittings kit. Use with any pressure pot or cartridge system.
Read more... |
|
|
TS1201 |
 |
The TS1201 is a hand held pen valve
using pinch tubes. This valve takes a direct feed of fluid from a pressure pot,
cartridge reservoir or syringe barrel. Its a simple non timed system providing a
high level of control over most low to medium viscosity liquids. Low cost hand
operated solution.
Read more... |
|
|
Cartridge Retainers |
 |
Pressurised cartridge retainers for direct feed of
adhesives to dispensing valves. With 0-100 psi adjustable regulators.
Assembly includes retainer body, air cap with airline hose and gasket
seal. For cartridge sizes 2.5oz, 6oz, 8oz, 310ml, 12oz, 20oz and 32oz.
All retainers are industrial grade safe to 100 psi.
Read more... |
|
|
Pressure Pots |
 |
A range of pressure pots featuring adjustable regulators for use with a
wide range of adhesives and fluids. Available in sizes from 1/2 litre to
19 litre. Provides a controlled feed and flow of adhesive down fluid
lines to a dispensing valve. Industrial grade and CE certified safe. .
Read more... |
|
|
Adhesive Dispensing
Ltd
provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
|
| |
 |
|
 |
|
 |
|
 |
|
 |
|
|
Dispensers &
Valve Controllers |
|
Fluid Dispensing
Valves |
|
Consumables
Syringes |
|
Dispensing Needle
Tips |
|
Cartridges &
Dual
Cartridges |
|
| |
|
|
