Disposable plastic cartridges
are available in 2.5, 6,
8, 10,
12, 20,
32 oz. (approximate metric value
60, 180, 230, 310 360, 600, 960cc). Available in
high-density natural polyethylene, all sizes are fitted with a 1/4"
NPT (6mm) female thread dispensing orifice. Supplied in sealed packs of
10 or bulk packs available on request.
Cartridges are capable of
handling a wide variety of chemical fluids for storage and dispensing
and can be easily adapted to both pneumatic and manual application
systems. Cartridges are commonly used in single component or pre-mixed
and frozen applications with polysulphides, solder pastes, adhesives,
epoxies, urethanes, greases, acrylics, etc.
Datasheet 73k
Plungers are for use with
dispensing cartridges. The plunger is inserted into the cartridge once
filled and moves consistently down the inner walls to ensure all
material is dispensed without waste. Plungers can be used at pressures
up to 100psi,
for example when used with a pneumatic cartridge gun system. Select
plunger size to suit the cartridge size you use.
High density polyethylene (HDPE) cartridges in sizes
2.5oz (60cc) to 32oz (960cc). All cartridges feature a standard 1/4" NPT
thread to accept the range of nozzles or luer lock fittings. Silicone
free and industrial grade safe to 100 psi, cartridges can be used in
manual and pneumatic guns,
barrel fillers or standard cartridge
retainers.
Read more...
Wiper plungers are available to suit each size
cartridge. They insert into the cartridge and move down under manual or
air pressure to push out the material and wipe the inner walls clean.
This eliminates waste and mess. All plungers are silicone free and
industrial grade safe to 100 psi. Select by size and style required.
Read more...
Packs of cartridges supplied with plungers in the same box. Sizes from
2.5oz (60cc) to 32oz (960cc).
All cartridges feature the 1/4" NPT thread for use
with nozzles and fittings. Plungers
insert into the cartridge and move down under manual
or air pressure to push out the material and wipe the inner walls clean.
Read more...
Re-usable end caps and tip caps for all cartridges.
Provides an air tight seal once material has been placed inside the
cartridge. Suitable for filling then storing materials. End caps push
onto the top of the cartridge, tip caps are threaded. All cartridges use
the 1/4" NPT standard thread. Caps are silicone free to eliminate
contamination.
Read more...
Nozzles for use with cartridges or on
spool valves.
All nozzles feature the standard 1/4" NPT thread for secure attachment
and use up to 100 psi. From standard 2.5" and 4" long to special fillet
and wide spread type. Roller nozzles can be used for spreading liquids
onto wide areas direct from cartridges and cartridge
guns.
Read more...
Hand held manual or pneumatic cartridge guns for all sizes, from 2.5oz
to 32oz. Manual guns are ideal for controlled application of materials
where an air feed is not available. Pneumatic guns provide a fast and
controlled flow of material and are useful for the dispensing of high
viscosity pastes, sealants and silicones.
Read more...
Aluminium retainers, caps and airline hoses for use
with cartridges in sizes 2.5oz (60cc) to 32oz (960cc). Cartridges can be
used to feed all metering valves when using any liquid or paste. All
cartridge retainers are safe for use to 100 psi. Especially useful for
the controlled feed of viscous materials under air pressure to a dosing
valve.
Read more...
High quality range of bench top stands, brackets and
accessories for use with syringe barrels, valves and cartridges. Simple
items to allow for the hands free mounting of a syringe, cartridge or
valve for hands free dispensing. The basic production master stand can
be used with most products on our website.
Read more...
Bench mounted syringe barrel filling stations to
reduce air entrapment and eliminate mess when filling your syringes.
Material is fed under pressure from larger cartridges to the barrel by
means of special adapter fittings. This ensure barrels are filled from
the bottom end for less mess and air. Reduces time spent manually
filling barrels.
Read more...
Quick Link to Product Pages
Adhesive Dispensing
Ltd
provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
Prices are in £ Sterling GBP and exclude
VAT which is charged on UK orders at checkout. Orders are encrypted on a
128 bit secure server for total security. All personal information and
payment details is encrypted on SSL secure website pages. Statements,
technical information and recommendations contained herein are based on
tests we believe to be reliable but they are not to be construed in any
manner as warrantees expressed or implied. The user shall determine the
suitability of the product for his intended use and the user assumes all
risk and liability whatsoever in connection therewith.
