Spool Valves

Home > Valves > Spool > TS5322

You currently have items in your basket. (Total=)

		Fluid Inlet Fitting
		Fluid Lines and Tubing
		Valve Controllers
		Pressure Pots
		Fittings & Connectors
		Needle Tips
		All Valves
		Spray Valves
		Auger Valves
		Diaphragm Valves
		Needle Valves
		Spool Valves
		Budget Controller
		Valve Stands
		Nozzles
		Valve Application Guide

		Datasheet 119k

TS5322 Mini Spool Valve

Designed to dispense medium to viscous materials fed from syringes, cartridges or pumps. The TS5322 provides repeat deposits of sealants, silicones, RTV, grease and pastes. Piston valves are approximately 4.0" (101.6mm) long and 1.38" (35mm) wide. They weigh approx. 0.31 lbs (141g). The minimum operating air pressure required is 70 psi. Flow rates (water) are approx. 2700cc/ml gallons per minute @ 100psi (maximum free flow area is measured without dispense tip adapter, which creates reduced output area). The minimum shot size for the valve is approximately 0.002 cc/ml and these valves will cycle up to speeds of 700 deposits per minute. The viscosity range of fluid is recommended at between 5000 - 1 Million CPS. The maximum fluid pressure is 500psi. The repeatability is ± 0.20%.

		Ideal for cyanoacrylates, UV cure and epoxies Zero cleanup with replaceable pinch tubes Low cost dispensing solution Repeat deposits, lines or potting Adjustable stroke control for fine tuning Syringe feed, cartridge or pressure pot Supplied with pinch tubes, fluid lines and tip kit Easy bench mount, machine mount or robot mount Simple to control using TS500R, TS250 or TS350

Specifications
Part ID:	TS5322
Size:	4.00" (101.6mm) L x 1.00" (25mm) Diameter
Weight:	141g (0.131lb)
Wetted Parts:	303 Stainless Steel, Anodizes Alu, Teflon, EPR
Viscosity Range:	5,000 - 1 Million CPS
Min Shot Size:	0.002 cc or ml
Flow Rate (water):	2700ml/ minute @100 psi
Repeatability:	±0.2%
Max Fluid Pressure:	500 psi
Material Inlet:	1/8" NPT
Material Outlet:	1/8" NPT
Mounting:	1/4" 20UNC-2B
On/Off Pressure:	50 psi (3.4 Bar) Minimum
Typical Materials:	RTV, Silicone, Gel, Pastes, UV Cure, Sealant, Grease, PVA
Lead Time:	*Usually Ships in 1-2 Business Days
Price:	£525.00
Order Online:

| Privacy | Terms | Accounts |

Prices are in GPB £ and exclude Vat at 17.5%. Vat is charged to all UK sales. Vat is not charged to customers outside the UK and European Union. For Vat exempt sales to EU customers based outside the UK, please tick the required option at checkout and provide your company Vat number. Shipping methods are selected for speed, traceability and cost effectiveness and include FedEx, DHL, BusinessPost and Royal Mail. Items can be shipped using customers own carrier account if required. Please contact us to set this up for you.

Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.