Use of a digital timed air dispenser will substantially reduce adhesive cost by eliminating waste, mess and inconsistent amounts. Adhesive deposits should be exact in order to properly bond components during assembly. Too little adhesive applied can result in failures and weak bonds. Too much will cause a mess and waste material often resulting in cleanup or rejects.

Operations that rely on simple hand tools such as toothpicks, swabs, medical syringes, sticks and squeeze bottles cannot guarantee consistent or controlled volume of fluid. This low pressure model is designed for watery liquids and cyanoacrylates.

The TS dispensers increase throughput, improve yields, and reduce production costs through controlled application of adhesives, lubricants and other assembly fluids. Four different dispenser configurations provide a cost-effective way to select the exact features needed to improve your specific fluid application process.

  Air powered 0-15 psi regulator
  Vacuum to prevent drips
  Digital timer with LCD display
  Shot counter on display
  Stores up to (10) time sequences
  Make repeat dots, beads or filling
  I/O if connecting to a PLC
  Small footprint on bench

Specifications

Each TS355 dispenser is supplied with the following: -

TS355 Digital Timed Air Dispenser
Power Cord
Airline Hose
Air Fittings Connector Kit
Foot Switch
Universal Power Supply (100V - 240V)
Barrel Adapter (10cc/ml)
Syringe Barrels (10cc/ml)
Syringe Pistons (10cc/ml)
Needle Assorted Tip Kit
Syringe Bench Holder Stand
Instruction Manual Setup Guide
 

This dispenser requires a compressed air supply and is supplied with a 4mm diameter quick connector fitting and feed tubing. The dispenser time can be set and air pressure adjusted to suit the fluid. Even the thinnest of liquids can be dispensed at up to 15 psi as watery liquids require a very low pressure. The syringe adapter assembly is connected to the dispenser and attached to the syringe barrel. The syringe is held like a pen. A needle tip is used for fine control. Barrels and tips come with the system as a starter kit. Use small bore tips for micro dots or fine beads. Use larger bore tips for thicker fluids or larger deposit sizes. A shot counter keeps track of deposits made. A vacuum air suck-back prevents watery liquids from dripping. This system features a digital memory storage (10 program), LCD display for air pressure, vacuum and time, dual air outlets and I/O for linking to a PLC. Teach mode provides quick setup.

Dispenser Accessories

Please select product ... 1. Syringe Barrels 2. Needle Tips 3. Adapter Hoses 4. Finger Switch 5. Barrel Fillers 6. Syringe Bench Stand 7. Airline 5 Micron Filter
 

|  Privacy   |   Terms   |  Accounts  |