|
|
|
You currently have
items in your basket. (Total=)
|
|
|
|
|
|
|
Fume Extraction System
Full A1 size extraction system
unit
for aerosol adhesives, lacquers, solvents, paints,
solders, particles and dust. Spray adhesives, conformal coatings and
paints, monomers, hazardous powders and particulates, resins, sealants,
solders, light grinding particles, organic solvents and cleaners etc.
Capture, contain, filter and expel for a cleaner, healthier working
environment within electronic design and rework, dental/medical labs,
pharmaceutical labs, design and technology, science in education and
more.
The workstation hood also accommodates prototypes,
models, ceramic parts, PCB’s etc, placed onto the hood base to be
sprayed, soldered, cleaned, glued, moulded, sanded etc..
|
Specification |
|
Part ID: |
T930H-D |
 |
|
Fan Motor
Spec: |
230V 50Hz
80W |
|
Air Volume
at Free Air: |
710 m3/hr |
|
Air
Velocity at Filter Face: |
0.60 m/sec |
|
Air
Velocity at Hood Face: |
0.60 m/sec |
|
Noise Level: |
60 dB (A)
|
|
Weight: |
60 kg |
|
Lead Time: |
5-7 days |
|
Part
Number |
Description |
Price |
Buy |
|
T930H-D |
Air Extraction Unit |
£ each |
 |
|
|
Description
Steel construction finished in dove grey - fan/filter unit mounted onto
hood enclosure complete with clear polycarbonate panel and hood lighting
- particulate filter - 2 centrifugal blowers, external rotor motor type,
brushless, UL, VDE and CSA approved - sealed electrical wiring and
switch, downstream of filter. 2 x Flexi-duct each 2 metres x 100mm dia.
Operation
All WS filtration systems
and extraction systems carry a lifetime warranty, are quiet in operation
and can be assembled in seconds. Place onto a desk, bench or trolley and
then simply plug in and switch on. These units can be used in two
positions.
The Flexi-duct can be fixed to a standard domestic vent or simply placed
through a partially open window to facilitate portability and/or
convenience. All handling and/or use of potentially harmful substances
is carried out within the hood enclosure in front of the intake filter
area. For artwork applications, standard A1 drawing boards can be placed
within the hood enclosure. The boards fit at an angle for efficient
overspray capture. |
 |
|
Filtration
The particulate (intake)
filter is a three stage graduated fibre filter with a high 'dust'
holding capacity for long life. Filtration to 5 micron particles. NB:
Spray particulate sizes vary from 10 to 20 microns.
The dual
process of filtration and then extraction to atmosphere via flexi-duct,
vastly reduces and/or eliminates operator exposures to potentially
hazardous substances.
These fume cabinets are
designed for immediate operator protection whereby ‘large’ particulates
(> 5 microns) are filtered out and ‘fine’ particulates (<5 microns)
together with odours, gases, vapours and fumes within the hood enclosure
are exhausted to atmosphere via the flexi-duct(s).
Demonstrating adequate
control of the risks to the health of employees students and the general
public, from dusts, powders, mists, fumes and vapours is the fundamental
requirement of the Control of Substances Hazardous to Health (CoSHH). |
|
Adhesive Dispensing Ltd provide a wide range of equipment options and
accessories for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes,
sealants, silicones, gels and epoxies. |
|
Prices are in £ Sterling
GBP and exclude VAT which is charged on UK orders at checkout. Orders
are encrypted on a 128 bit secure server for total security. All
personal information and payment details is encrypted on SSL secure
website pages. Statements, technical information and recommendations
contained herein are based on tests we believe to be reliable but they
are not to be construed in any manner as warrantees expressed or
implied. The user shall determine the suitability of the product for his
intended use and the user assumes all risk and liability whatsoever in
connection therewith.
Copyright © 2008 Adhesive Dispensing Ltd. All rights reserved.
|
|
|
