30cc Straight Wall Pistons

Freephone. 0800 094 9058
Tel. +44 (0) 845 652 0058
Fax. +44 (0) 845 652 0059

Home > Components > Pistons > 7300006RPK

You currently have items in your basket. (Total=)

Components

10cc Clear Barrels

10cc Black Barrels

10cc Amber Barrels

10cc Wiper Pistons

10cc Easy Flo Pistons

10cc Flat Wall Pistons

10cc End Caps

10cc Adapter 3ft

10cc Adapter 6ft

10cc Adapter Orings

Tip Caps

Dispense Tips

Accessories

Barrel Filling Systems

Barrel Storage Racks

Dispensers

Hand Plungers

Anaerobics

UV Cure


30/50cc Flat Walled Syringe Barrel Piston ADL precision components provide safe and leak free fluid dispensing from syringe barrels. These pistons move flat against the inner walls of the syringe barrel when using high viscosity pastes and fluids.

Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100psi (6.9bar). Straight Wall Pistons (red) are recommended for reduced stringing and "bouncing" with high viscosity products. Each pack contains 20 pistons and this size works with both 30cc and 55cc size syringe barrels.

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.


Product Details
Part ID:	7300006RPK
Material:	Polyethylene
Colour:	Red
For Barrel Size:	30/55cc (30/55ml)
Height:	16.00 mm
Outer Diameter:	23.00 mm
Lead Time:	Ships in 24 Hours

Size	Pack Size	Part Number	Price	Buy
30/55cc	20	7300006RPK	£ per pack
30/55cc	1000	7300006R-1000	£ per pack

Syringe product pages

Silicone and chloride free plastics

Compatible with 30 and 55cc syringe barrels

Resistant to aggressive fluids and solvents

Available from stock

Provides loose fit in syringe to reduce drips

Supplied in sealed packaging

Related Products

Tip Caps

Barrels

Adapters

End Caps

Air-Powered Dispensers * Industrial Dispensing Components * Precision Dispense Valve Systems * XYZ Bench Robots

Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles

| Privacy | Terms | Accounts |

Prices are in £ Sterling GBP and exclude VAT which is charged on UK orders at checkout. Orders are encrypted on a 128 bit secure server for total security. All personal information and payment details is encrypted on SSL secure website pages. Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.


	Support

	Literature
	Product Datasheet
	Syringe Barrels Brochure
	Dispense Tips Brochure
	Full Catalogue
	Part Numbers List

	Information
	Important Safety Information

	Contact Us
	Equipment Recommendations
	Request a Quote
	Technical Support
	Applicator Assist

	Shipment of this product
	This product will ship with Interlink Express to UK customers on a tracked delivery direct from stock. For Europe deliveries, items are shipped via DPD or Air Express. International shipments, are sent RM Signed-For or FedEx.

	Further Information
	Pistons are made of plastic to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel.